Categories
FEATURED PRODUCTS
-
Essential to protect yourself and everyone around you. Our 2-layer adult face masks are treated with bactericidal silver ions for even better protection and are perfect for everyday use. They are reusable, machine washable up to 60°C (140°F), comfortable to breath through and do...Regular price €810,71Regular priceUnit price per
-
These polished nickel white metal finish belt buckles are detailed as your favorite S&S aircleaner.Regular price €1.056,31Regular priceUnit price per
-
This silver patina finish belt buckle is detailed as Panhead style cam cover. Nice reproduction of the original belt buckles of the 1980's and 1990's.Regular price €931,49Regular priceUnit price per
-
Black and white baseball cap with adjustable head strap and the classic orange Zodiac Custom Products logo.Regular price €991,96Regular priceUnit price per
-
Cotton T-shirt with the classic Zodiac and Crossed Piston logo.Regular price €1.312,64Regular priceUnit price per
-
Cotton T-shirt with the classic Zodiac and Crossed Piston logo.Regular price €1.056,31Regular priceUnit price per
-
Cotton T-shirt with the classic Zodiac and Crossed Piston logo.Regular price €1.068,11Regular priceUnit price per
-
Cotton T-shirt with the classic Zodiac and Crossed Piston logo.Regular price €1.005,09Regular priceUnit price per
Franklin Motors
Jims
-
Vendor:Rubber mounted Harley-Davidson V-Twins use the engine as a structural part of the chassis. When the engine is removed, it becomes impossible to roll the motorcycle. This can incapacitate a lift or, at the very least, tie up floor space. Jims Rolling Buddy plates...Regular price €138,83Regular priceUnit price per
-
Vendor:This tool will be a real time saver when removing and/or installing the shifter mechanism sleeve in the Cruise Drive 6-speed transmission. No need to disassemble the transmission, simply use this handy tool to remove the old one and later install the new shifter...Regular price €163,90Regular priceUnit price per
-
Vendor:The gear shifter shaft bushings on 5 and 6 speed Touring models typically have a service life of 20000 miles (32000 KM) or less. Bushing wear results in an annoying rattle from the loose shifter, the linkage parts and accelerated wear of all related...Regular price €169,64Regular priceUnit price per
-
Vendor:Use this tool to loosen and remove both shifter shafts from the transmission door, allowing further disassembly. Works on 2006 Dyna 6 Speed transmissions, as well as on all Twin Cam 6 Speed transmissions 2007 to present.Regular price €44,27Regular priceUnit price per
-
Vendor:Use to remove and install the shifter shaft sleeve in all 5 speed Big Twin transmissions and most aftermarket 6 Speed transmissions. This tool may be used to remove or install replacement or upgrade shifter shaft sleeve, assembly and drum. Works for Big Twin...Regular price €64,39Regular priceUnit price per
-
Vendor:Newly developed, precision machined rocker arms for Big Twin Shovelhead models from 1966 thru 1984. These thoroughly tested roller rockers are made in the USA from 4340 chrome-moly steel and heat treated castings (OEM 17360-66A and 17375-66A).Regular price €1.117,53Regular priceUnit price per
-
Vendor:Exclusively designed by Jims to make installation and removal of Timken outer race snap rings easy and without damaging the case. A must when working on 1990 to present cases without inserts. This tool can be used on all Big Twin models from 1969...Regular price €192,50Regular priceUnit price per
-
Vendor:Installs the sprocket shaft seal on 1995-2003 Sportster and 1995-2002 Buell perfectly square and at the proper depth. Use in conjunction with ZPN 753605 installer tool.Regular price €171,47Regular priceUnit price per
-
Vendor:Installs the sprocket shaft seal on 1995-2003 Sportster and 1995-2002 Buell perfectly square and at the proper depth. Use in conjunction with ZPN 753605 installer tool.Regular price €199,04Regular priceUnit price per
-
Vendor:This short socket is designed specifically for XL-models to remove, install and properly tighten the front final drive sprocket pulley. Although a similar tool for Big Twin will also fit the nut, the main shaft on Sportster models does not extend through for the...Regular price €131,91Regular priceUnit price per
-
Vendor:This tool has been designed to remove the flywheel sprocket shaft inner bearing race on all 1955-1999 Big Twin and 1999-2017 Twin Cam. Comes complete with Jims T-bar and hardware. If heat is needed to remove race see tool ZPN 751111 surface temperature indicator...Regular price €589,51Regular priceUnit price per
-
Vendor:Used to remove and install the Timken bearing race in the crankcase. To be used with ZPN237107 Spacer Driver and ZPN235804 Race & Bearing Installation Tool.Regular price €133,47Regular priceUnit price per
-
Vendor:Used to remove and install the Timken bearing race in the crankcase. To be used with ZPN237107 Spacer Driver and ZPN235804 Race & Bearing Installation Tool.Regular price €121,33Regular priceUnit price per
-
Vendor:This hard cap protects the sprocket shaft when working on the engine, must be used when working with our crank assembly removing tool (ZPN237337). Works with all 1955 thru 1999 Big Twin and 1999 thru 2006 Twin Cam, except 2006 Dyna.Regular price €80,71Regular priceUnit price per
-
Vendor:This tool is used to hold the flywheel assembly in vise, with or without left case attached. Can be used on all Big Twin models from 1955 thru 1999 and 1999 thru 2006 Twin Cam except 2006 Dyna. Comes complete with instruction sheet.Regular price €236,79Regular priceUnit price per
-
Vendor:The Milwaukee Eight engine has a new crankshaft oil seal that is difficult to remove without potentially damaging the crankcase bore. This unique Jims tool is designed to do the job right and without the chance of damage to crankcase. Simply insert the removal...Regular price €406,29Regular priceUnit price per
-
Vendor:This adapter for the ZPN 753687 Jims main bearing tool is a simple time and money saver when installing the main bearing on a Milwaukee Eight left side crankcase. Simply position this adapter on top of the bearing support on the press table. When...Regular price €93,11Regular priceUnit price per
-
Vendor:This tool is designed to pull steering head bearing cups straight and true into Big Twin frames from 1936 to present as well as most aftermarket frames.Regular price €138,83Regular priceUnit price per
-
Vendor:Makes removal and installation of steering head bearing races as used in 1949-1984 Big Twin, all FX, 1978-2022 Sportster, 1980-2013 Touring, 1982-2000 FXR, 1984 to present Softail, 1991-2017 Dyna, all Buell and all V-Rod models an easy job. Must be used with driver spacer...Regular price €166,78Regular priceUnit price per
-
Vendor:Installs left and right side swing arm bearings at the correct, different depths. Includes a tool to press the spacers out of the bearings.Regular price €280,27Regular priceUnit price per
-
Vendor:The removal & installation tool can be used with or without a press and presses on the outer sleeve of the bushing, preventing damage to the Cleve blocs. The spreading tool eases installation of the swing arm in the chassis. Tools work on 1980-2001...Regular price €387,49Regular priceUnit price per
-
Vendor:The removal & installation tool can be used with or without a press and presses on the outer sleeve of the bushing, preventing damage to the Cleve blocs. The spreading tool eases installation of the swing arm in the chassis. Tools work on 1980-2001...Regular price €74,70Regular priceUnit price per
-
Vendor:This patent pending hand tool simplifies the way to verify proper tappet adjustment. After adjusting the tappet, simply insert the tip of this tool under the hydraulic unit retaining clip, above the pushrod seat. In fact it is a "Go-or-no-go gauge", if the tip...Regular price €55,25Regular priceUnit price per
-
Vendor:American made tappet guides, feature helical style oil grooves for better lubrication. Fits Sportster models 1957 thru 1985, sold each (OEM 18607-57A).Regular price €127,08Regular priceUnit price per
