{"title":"Rear Suspension","description":"","products":[{"product_id":"789988","title":"SWINGARM PARTS FOR TOURING 2002-2008","description":"\u003cp\u003eUnless differently indicated all parts are sold each. When you need more than one of an item this is indicated between parenthesis, for example (2).\u003c\/p\u003e","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":56164993007991,"sku":"789988","price":354.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_6f264b77-6f72-468f-af9c-6ec9d1dfd041.png?v=1762938808"},{"product_id":"710011","title":"HARRISON \"BILLET\" BRAKE CALIPERS","description":"\u003cp\u003eHarrison Engineering was, back in 1986, one of the first companies to design and develop a multi-piston aftermarket caliper for Harley-Davidson motorcycles. Each fully progressive 4 or 6 Piston caliper is precisely CNC machined from lightweight blocks of aircraft quality aluminum alloy. To keep the internal tolerances to a minimum, the caliper pistons are machined from special low expansion aluminum alloy and have a hard anodized finish that has the same anti-wear properties as hardened steel. For maximum performance the calipers have one pad for each piston. Harrison claims this gives a more ‘leading edge bite' on the disc than any two pad, or differential bore calipers. It is also especially beneficial in wet conditions, because the first set of pads sweep water off the disc, while the following 2 or 4 pads are still ‘biting' on the disc. That removes the effect of the calipers ‘skating' on the disc, and then braking sharply and suddenly when the disc becomes dry. They are truly progressive calipers, with a direct and sensitive relation between the amount of lever pressure, and the amount of braking power. These show polished or black anodized calipers not only have ultimate stopping power, they also have the ultimate looks, and are available for almost all models. The front calipers bolt straight to the front fork bottom leg, and the rear sets include the mounting bracket. Stainless steel shims, to space the caliper to the disc, and mounting bolts are included with each kit. The front as well as the rear sets are available in both 4 or 6 piston versions, as well as polished or black anodized. Matching design brake rotors can be found elsewhere in this catalogue. All Harrison Billet calipers are approved, and come with a limited lifetime warranty on piston wear\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eExcept where mentioned differently ALL brake calipers are ABS compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHARRISON BILLET LIFETIME WARRANTY\u003c\/strong\u003e  Harrison Billet brake calipers are top-quality products and besides a twelve month limited warranty on the caliper, they carry a lifetime warranty on piston wear. No matter how old your Harrison Billet caliper is, whenever it shows a piston to caliper brake fluid leak, that is not caused by worn seals, you can return the caliper (freight pre-paid) to Zodiac. It will be repaired at no charge and returned to you freight collect. Warranty will be void when abuse, or poor maintenance of the caliper causes the defect.\u003c\/p\u003e","brand":"Harrison Billet","offers":[{"title":"Default Title","offer_id":56165121687927,"sku":"710011","price":590.14,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_5e232fb3-493b-4f8f-a7ec-7622e98084d1.png?v=1762941731"},{"product_id":"710013","title":"HARRISON \"BILLET\" BRAKE CALIPERS","description":"\u003cp\u003eHarrison Engineering was, back in 1986, one of the first companies to design and develop a multi-piston aftermarket caliper for Harley-Davidson motorcycles. Each fully progressive 4 or 6 Piston caliper is precisely CNC machined from lightweight blocks of aircraft quality aluminum alloy. To keep the internal tolerances to a minimum, the caliper pistons are machined from special low expansion aluminum alloy and have a hard anodized finish that has the same anti-wear properties as hardened steel. For maximum performance the calipers have one pad for each piston. Harrison claims this gives a more ‘leading edge bite' on the disc than any two pad, or differential bore calipers. It is also especially beneficial in wet conditions, because the first set of pads sweep water off the disc, while the following 2 or 4 pads are still ‘biting' on the disc. That removes the effect of the calipers ‘skating' on the disc, and then braking sharply and suddenly when the disc becomes dry. They are truly progressive calipers, with a direct and sensitive relation between the amount of lever pressure, and the amount of braking power. These show polished or black anodized calipers not only have ultimate stopping power, they also have the ultimate looks, and are available for almost all models. The front calipers bolt straight to the front fork bottom leg, and the rear sets include the mounting bracket. Stainless steel shims, to space the caliper to the disc, and mounting bolts are included with each kit. The front as well as the rear sets are available in both 4 or 6 piston versions, as well as polished or black anodized. Matching design brake rotors can be found elsewhere in this catalogue. All Harrison Billet calipers are approved, and come with a limited lifetime warranty on piston wear\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eExcept where mentioned differently ALL brake calipers are ABS compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHARRISON BILLET LIFETIME WARRANTY\u003c\/strong\u003e  Harrison Billet brake calipers are top-quality products and besides a twelve month limited warranty on the caliper, they carry a lifetime warranty on piston wear. No matter how old your Harrison Billet caliper is, whenever it shows a piston to caliper brake fluid leak, that is not caused by worn seals, you can return the caliper (freight pre-paid) to Zodiac. It will be repaired at no charge and returned to you freight collect. Warranty will be void when abuse, or poor maintenance of the caliper causes the defect.\u003c\/p\u003e","brand":"Harrison Billet","offers":[{"title":"Default Title","offer_id":56165136597367,"sku":"710013","price":704.38,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_919fd20f-2973-46d2-a706-011fa5b93d96.png?v=1762941884"},{"product_id":"721402","title":"PM REAR CUSTOM RIGID CALIPER KIT","description":"\u003cp\u003eThe four piston classic design calipers is the proven choice for custom bike builders for many years. It provides four piston braking power you can depend on. This is the brake for your custom rigid motorcycle. Easy to install and easy to service. Fits all rigid models rear disc as well as many custom Softails and other custom application. Includes 125x4R type caliper and bracket. Available for use with 10\" and 11.5\" stock or aftermarket discs.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eExcept where mentioned differently ALL brake calipers are ABS compatible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePM FINISHES\u003c\/strong\u003e  Most PM calipers are available in polished, chrome and Black Contrast Cut.\u003cstrong\u003e    Polished\u003c\/strong\u003e  Performance Machine has a reputation for supplying only the highest quality polishing on all of its components. Each polisher at PM takes pride in supplying a top quality finish to every product. The high luster finish is easy to maintain.\u003cstrong\u003e    Chrome\u003c\/strong\u003e  Show chrome is what you get with every PM chrome product. The secret is in the preparation! Each raw part is polished to a mirror like finish before the chrome is even laid on! This process allows PM to create ultra smooth and durable chrome plated parts. Lustrous finish is easy to maintain with proper maintenance and care. Includes a two year warranty on chrome plating.\u003cstrong\u003e    Black Contrast Cut\u003c\/strong\u003e  For those who prefer a more subtle look with less shine, PM offers most calipers in Black Contrast Cut. Much like PM's chromed brakes, each raw part goes to their polishing department first, creating a mirror like finish before the anodizing is done! The result is an exceptionally smooth finish. After anodizing, the product is machined again to expose the raw aluminum of the PM logo.\u003c\/p\u003e","brand":"Performance Machine","offers":[{"title":"Default Title","offer_id":56165283889527,"sku":"721402","price":792.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_2f305565-5ae0-468c-b2fb-c61290244375.png?v=1762942549"},{"product_id":"144032","title":"CALIPER ANCHOR ARM","description":"\u003cp\u003eChrome plated replacement for the stock white plated arm. Fits all Big Twin 1973-1983 including the early \"Boomerang\" and the later \"Y\" shape caliper supports (OEM 44154-73T).\u003c\/p\u003e","brand":"Zodiac (Genuine Zodiac Products)","offers":[{"title":"Default Title","offer_id":56165340316023,"sku":"144032","price":27.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_762efa6f-4f36-434a-87f8-88ebdef0ddb9.png?v=1762942857"},{"product_id":"99033","title":"BRAKE LINE AND WIRE CLIPS","description":"\u003cp\u003eThese clips are used in many places on models from 1968 to present. They are, for example, used to hold the rear brake line on the swing arm of 1958 thru 1986 4-speed Big Twin, throttle cables to the frame on Ironhead Sportsters and numerous other applications. Take up to 1\/2\" diameter hoses and cables and have a .200\" mounting hole.\u003c\/p\u003e","brand":"Zodiac (Genuine Zodiac Products)","offers":[{"title":"Default Title","offer_id":56166512329079,"sku":"99033","price":0.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_975bf657-9bb4-4354-91ac-1ed0b023a1dc.png?v=1762949919"},{"product_id":"233431","title":"GEAR CASE COVER, FITTINGS \u0026 GEARS K, KH, KHK, KK AND EARLY XL","description":"\u003cp\u003eParts fit all engines 1952-1957, unless otherwise specified.\u003c\/p\u003e","brand":"Bender Cycle","offers":[{"title":"Default Title","offer_id":56168966750583,"sku":"233431","price":195.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_fea0201c-3a99-48bc-adf7-ab0fd8d3f92f.png?v=1762981146"},{"product_id":"301597","title":"LOWER END BIG TWIN 1936-1999","description":"\u003cp\u003eQuality lower end parts for overhead valve Big Twin, all parts are sold each unless stated otherwise.\u003c\/p\u003e","brand":"Zodiac (Genuine Zodiac Products)","offers":[{"title":"Default Title","offer_id":56169062695287,"sku":"301597","price":67.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_5c170f21-1f45-4582-a2c2-13a427d6ebf9.png?v=1762982004"},{"product_id":"781175","title":"LOWER END BIG TWIN 1936-1999","description":"\u003cp\u003eQuality lower end parts for overhead valve Big Twin, all parts are sold each unless stated otherwise.\u003c\/p\u003e","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":56169062760823,"sku":"781175","price":57.69,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_a12dc4cc-bead-4a8f-b508-906d64b8b564.png?v=1762982007"},{"product_id":"781177","title":"LOWER END BIG TWIN 1936-1999","description":"\u003cp\u003eQuality lower end parts for overhead valve Big Twin, all parts are sold each unless stated otherwise.\u003c\/p\u003e","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":56169062793591,"sku":"781177","price":57.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_a8dfe082-383e-4dea-9bad-d9410bef5839.png?v=1762982009"},{"product_id":"781176","title":"LOWER END BIG TWIN 1936-1999","description":"\u003cp\u003eQuality lower end parts for overhead valve Big Twin, all parts are sold each unless stated otherwise.\u003c\/p\u003e","brand":"V-Twin","offers":[{"title":"Default Title","offer_id":56169062826359,"sku":"781176","price":66.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_872be6b6-1e7d-40c9-9ec2-73963f0f304b.png?v=1762982012"},{"product_id":"22458","title":"GASKETS, O-RINGS \u0026 SEALS FOR 1972-1985 IRONHEAD SPORTSTER","description":"\u003cp\u003eIndividual gasket, seals and O-rings for Sportster 1972-1985.\u003cstrong\u003e\u003cbr\u003e Note: \u003c\/strong\u003eSold to dealers in pack quantities as listed.\u003c\/p\u003e","brand":"Zodiac (Genuine Zodiac Products)","offers":[{"title":"Default Title","offer_id":56169075212663,"sku":"22458","price":1.03,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_fe5f1b7a-37d9-41b3-96ad-39606c6f8221.png?v=1762982245"},{"product_id":"32596","title":"SWINGARM PARTS FOR XL \u0026 XR SPORTSTER 2004-2022","description":"\u003cp\u003eExcept where indicated differently all parts are sold each. Required quantities are indicated between parenthesis, for example like (2).\u003c\/p\u003e","brand":"Zodiac (Genuine Zodiac Products)","offers":[{"title":"Default Title","offer_id":56169483895159,"sku":"32596","price":290.67,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_7d4088a4-c406-4bee-a5c2-644b25766e5f.png?v=1762988186"},{"product_id":"32598","title":"SWINGARM PARTS FOR XL \u0026 XR SPORTSTER 2004-2022","description":"\u003cp\u003eExcept where indicated differently all parts are sold each. Required quantities are indicated between parenthesis, for example like (2).\u003c\/p\u003e","brand":"Zodiac (Genuine Zodiac Products)","offers":[{"title":"Default Title","offer_id":56169483960695,"sku":"32598","price":297.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_bd57e9ac-706d-433f-80ab-ae2c802c8b64.png?v=1762988188"},{"product_id":"32567","title":"SWINGARM PARTS FOR XL \u0026 XR SPORTSTER 2004-2022","description":"\u003cp\u003eExcept where indicated differently all parts are sold each. Required quantities are indicated between parenthesis, for example like (2).\u003c\/p\u003e","brand":"Zodiac (Genuine Zodiac Products)","offers":[{"title":"Default Title","offer_id":56169483993463,"sku":"32567","price":47.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_a0e8f812-0a75-4579-86ac-ddb3665bd415.png?v=1762988190"},{"product_id":"788794","title":"REAR CRASH BARS FOR 45CI MODELS","description":"\u003cp\u003ePerfect replicas from the OEM accessory bars, originally called \"Safety Guard\". Bar, a set of U-bolts and a set of top clamp bolts must be ordered separately. Fits all 1930-1952 45CI Civilian and Army models. \u003c\/p\u003e","brand":"Samwel Supplies","offers":[{"title":"Default Title","offer_id":56170977657207,"sku":"788794","price":25.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_b12d9768-d781-4b32-bd2c-c56f09d7b814.png?v=1763027428"},{"product_id":"788792","title":"REAR CRASH BARS FOR 45CI MODELS","description":"\u003cp\u003ePerfect replicas from the OEM accessory bars, originally called \"Safety Guard\". Bar, a set of U-bolts and a set of top clamp bolts must be ordered separately. Fits all 1930-1952 45CI Civilian and Army models. \u003c\/p\u003e","brand":"Samwel Supplies","offers":[{"title":"Default Title","offer_id":56170977689975,"sku":"788792","price":18.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_b45b2fc7-c4e9-434d-916f-30e2ebbba814.png?v=1763027430"},{"product_id":"788793","title":"REAR CRASH BARS FOR 45CI MODELS","description":"\u003cp\u003ePerfect replicas from the OEM accessory bars, originally called \"Safety Guard\". Bar, a set of U-bolts and a set of top clamp bolts must be ordered separately. Fits all 1930-1952 45CI Civilian and Army models. \u003c\/p\u003e","brand":"Samwel Supplies","offers":[{"title":"Default Title","offer_id":56170977722743,"sku":"788793","price":14.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_0e994f20-1724-4985-ac8f-ebe7b79b0939.png?v=1763027430"},{"product_id":"742875","title":"SWINGARM PARTS FOR SOFTAIL 2000-2017","description":"\u003cp\u003eUnless differently indicated all parts are sold each. When you need more than one of an item this is indicated between parenthesis, for example (2).\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56171447189879,"sku":"742875","price":37.39,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_6d267f62-beac-48fd-b3dd-fded4c746ffa.png?v=1763035287"},{"product_id":"238763","title":"SWINGARM PARTS FOR SOFTAIL 1984-1999","description":"\u003cp\u003eUnless differently indicated all parts are sold each. When you need more than one of an item this is indicated between parenthesis, for example (2).\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56171447222647,"sku":"238763","price":33.87,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_61bcee63-6677-4d89-8987-0efb32eadf4f.png?v=1763035289"},{"product_id":"236444","title":"\"SUPER-ASS\" SWINGARM KITS FOR 1991-1999 SOFTAIL AND ZODIAC WIDETAIL FRAMES","description":"\u003cp\u003eThe Super-Ass swingarm kit is for those that want to convert their Softail or Wide-Tail Softail to accept Avon's 230x15 Super Wide rear tire. This tire measures 250mm wide if fitted on an 8\" wide rim. Kit bolts straight into both the stock Softail frame as well as the Zodiac WideTail frame. You can still use the final belt drive when used in a WideTail frame, a stock Softail must be converted to final chain drive or the late 20mm wide belt. When you use this narrow belt or a chain in a Zodiac WideTail frame you can easily go up to a 250 series tire.\u003cstrong\u003e\u003cbr\u003e \u003cbr\u003e The complete kit includes:\u003c\/strong\u003e \u003cbr\u003e •Fully TIG welded swingarm with stainless fender extension plate \u003cbr\u003e •Swingarm pivot \u003cbr\u003e •Rear wheel axle with chrome nuts \u003cbr\u003e •Crankshaft extension for 1986-1999 models \u003cbr\u003e •Extended crankshaft nut for 1991-1999 models \u003cbr\u003e •Primary spacer with O-ring and bolts \u003cbr\u003e •Longer inner primary mounting bolts\u003cbr\u003e •Primary gasket set \u003cbr\u003e •Transmission off-set plate \u003cbr\u003e •A complete new bracket and hardware kit for the 5th transmission mounting stud \u003cbr\u003e \u003cbr\u003e Kits can also be used for 1987-1990 models if correct crankshaft extension, extended sprocket shaft nut and primary gaskets are used. Due to the wide variety of wheels,fenders, fender struts, and wheel spacers are not included,these can be found elsewhere in this catalog.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56171495620983,"sku":"236444","price":119.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_25ba8b0b-ba64-4042-bfc1-b441dd6a7509.png?v=1763035971"},{"product_id":"753549","title":"RADIUM WIDE TIRE CONVERSION FOR TOURING","description":"\u003cp\u003eThis very complete kit includes almost any part needed to convert 2002-2006 FLHT, FLHR and FLTR series Touring into a true \"Wide Ass\" Bagger with an up to 200 wide rear tire on 5.5\" wide rim and 16\", 17\" or 18\" diameter rear wheel.\u003cstrong\u003e\u003cbr\u003e \u003cbr\u003e Kit includes:\u003c\/strong\u003e\u003cbr\u003e • Wide swing arm (black finished) with 1\" (25.4mm) rear wheel axle \u003cbr\u003e • Custom 14 Gauge (2.1mm) thick stock style raw steel rear fender that accepts the stock tail light\u003cbr\u003e • Special saddle bag support kit that takes stock and stock-style saddle bags\u003cbr\u003e • Complete primary offset kit with extended transmission main shaft and extended main drive gear\u003cbr\u003e • Required hardware\u003cbr\u003e • 31 tooth front and 65 tooth rear final drive pulleys for use with a 135 tooth 20mm wide final drive belt (belt not included)\u003cbr\u003e \u003cbr\u003e This conversion kit fits with stock and most aftermarket seats, as well as stock and most aftermarket exhaust systems. Installation of a TourPak or backrest requires OEM Detachable Docking Vehicles \u0026amp; Parts \u0026gt; Vehicle Parts \u0026amp; Accessories kit. You can use the OEM rear brake caliper in conjunction with an 18\" diameter rear wheel, smaller diameter rear wheel may require the use of a smaller size custom rear brake caliper. Final drive belt, as well as required gaskets and seals are not included. You may consider purchasing one of our convenient gasket kits. This makes sure you can get the job done without delay. Wheel and tire are not included because of the very wide selection available. Please check out the Zodiac Bikers Book for these.\u003cstrong\u003e\u003cbr\u003e Note:\u003c\/strong\u003e Does not work on models equipped with OEM, Screamin' Eagle or other aftermarket 6-speed transmission.\u003cstrong\u003e\u003cbr\u003e Note:\u003c\/strong\u003e Installation of TourPak, backrest or OEM Detachable Docking Vehicles \u0026amp; Parts \u0026gt; Vehicle Parts \u0026amp; Accessories requires custom modifications.\u003c\/p\u003e","brand":"Belt Drives LTD","offers":[{"title":"Default Title","offer_id":56172134302071,"sku":"753549","price":305.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_8389a452-bef9-4a78-9fa3-04478dd965a9.png?v=1763039724"},{"product_id":"722942","title":"ZODIAC'S SPORTAIL SPORTSTER FRAME FOR UP TO 250 TIRES","description":"\u003cp\u003eWe have created a Sportster frame with the same sleek design as our Wide Tail Softail frame. The Sportail frame features a \"Stretched Low-Rider\" look, is made from thick wall quality tubing and TIG-welded for improved strength and road holding without disturbing the lines. To obtain the sleek stretched Low-Rider look the steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The engine is located with no offset in the frame and a rear frame section wide enough to accept extra wide tires. The Sportail SuperAss, is wide enough to take up to 250 wide rear tires. In combination with final belt drive. The SuperAss requires an off-set front pulley or a spacer behind the front pulley. Pulley cover requires spacing. The length of the frame requires the use of a drive belt with approx. 135 teeth. Mounts for a Big Twin side stand and Big Twin forward controls as well as 1974 to present Sportster forward controls are welded in place. Stock style Narrow or Wide Glide forks as well as our state-of-the-art Ceriani forks can be used with the frame, it will also accept many other Custom front forks. The frame will take any 1974-1985 Ironhead Sportster engines as well as 4 Speed and 1986-2003 style 5 Speed Evolution Sportster engines. Because of the right hand final drive the stock style Softail oil tank does not fit, therefore our special Sportail style oil tank or a custom made oil tank such as our Custom Round oil tank must be used. The frame is designed to take Softail type parts and accessories such as Flat Side tanks, forward controls, seats and 1989-1999 Softail shock absorbers. Due to the completely different shape of the swingarm a Rigid Frame type rear caliper kit must be used. \u003cstrong\u003e1989-1999 Softail shock absorbers can be found elsewhere in this section. \u003cbr\u003e Note: \u003c\/strong\u003eZodiac Sportail frames are approved as a replacement frame for Harley-Davidson Sportster motorcycles. They may be used in combination with our approved GCB front forks and\/or any other approved components.\u003c\/p\u003e","brand":"Rivera Primo","offers":[{"title":"Default Title","offer_id":56172296175991,"sku":"722942","price":403.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_a2093950-7010-4c21-81e9-32477d66cca2.png?v=1763040179"},{"product_id":"778128","title":"VG CLASSIC MACHINED STEEL FRAME COMPONENTS","description":"\u003cp\u003eThese Made-in-Holland replica frame parts are perfect copies from the stock components. They are great for restauration jobs and have to be welded onto your frame. We recommend to have the welding done by a qualified welder using \"Nickel-filler 61\" welding wire.\u003c\/p\u003e","brand":"VG Classic Frames \u0026 Parts","offers":[{"title":"Default Title","offer_id":56172518769015,"sku":"778128","price":20.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_dc36ea80-7cdd-4cd3-83d6-d489ba1bfb6f.png?v=1763043027"},{"product_id":"237653","title":"ZODIAC'S \"WIDE-TAIL\" EVOLUTION SOFTAIL STYLE FRAME","description":"\u003cp\u003eA custom built frame should not only look right but also handle well and must withstand the most severe stress, vibration and fatigue tests. It is also normal practice that the engine and transmission combination must fit in the frame without grinding, drilling or any other modification. You can be assured that this frame is the best and nothing but the best. For the Custom Builder that likes a Softail with \"Stretched Lowrider\" looks, this sleek design Softail frame has it all. The Wide-Tail frame uses thick wall tubing in some sections of the frame, which drastically improves the strength and roadholding without disturbing the lines. To give that sleek, stretched lowrider look, steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The rear section of the frame is widened to accept extra wide tires, including our new \"Big Foot\" Avon 200 tire, in combination with final chain drive. All mounts for side stand and forward controls are welded in place. Frames and swingarms are fully Tig-Welded for superior strength. Frame kits come complete with frame, swingarm, stainless swingarm pivot bolt with chrome spacer and bearing kit, chrome rear wheel axle and Stainless Steel protection plates for swingarm and shocks. All parts are separately available. Fender struts must be ordered separately. \u003cstrong\u003e\u003cbr\u003e Note: \u003c\/strong\u003eZodiac Wide Tail frames are approved by the Dutch R.D.W. and the German approval as a replacement frame for Harley-Davidson motorcycles, engine capacity may not exceed 1740 cc, power may not exceed 110 Horsepower. They may be used in combination with our approved rear Swingarms and our approved Ceriani front forks.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177056514423,"sku":"237653","price":49.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_a4c88d3b-f419-4d22-bc6e-af43d7c4800c.png?v=1763070973"},{"product_id":"238762","title":"ZODIAC'S \"WIDE-TAIL\" EVOLUTION SOFTAIL STYLE FRAME","description":"\u003cp\u003eA custom built frame should not only look right but also handle well and must withstand the most severe stress, vibration and fatigue tests. It is also normal practice that the engine and transmission combination must fit in the frame without grinding, drilling or any other modification. You can be assured that this frame is the best and nothing but the best. For the Custom Builder that likes a Softail with \"Stretched Lowrider\" looks, this sleek design Softail frame has it all. The Wide-Tail frame uses thick wall tubing in some sections of the frame, which drastically improves the strength and roadholding without disturbing the lines. To give that sleek, stretched lowrider look, steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The rear section of the frame is widened to accept extra wide tires, including our new \"Big Foot\" Avon 200 tire, in combination with final chain drive. All mounts for side stand and forward controls are welded in place. Frames and swingarms are fully Tig-Welded for superior strength. Frame kits come complete with frame, swingarm, stainless swingarm pivot bolt with chrome spacer and bearing kit, chrome rear wheel axle and Stainless Steel protection plates for swingarm and shocks. All parts are separately available. Fender struts must be ordered separately. \u003cstrong\u003e\u003cbr\u003e Note: \u003c\/strong\u003eZodiac Wide Tail frames are approved by the Dutch R.D.W. and the German approval as a replacement frame for Harley-Davidson motorcycles, engine capacity may not exceed 1740 cc, power may not exceed 110 Horsepower. They may be used in combination with our approved rear Swingarms and our approved Ceriani front forks.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177056547191,"sku":"238762","price":694.58,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_8e5fe6cf-5876-4e9a-bee6-e982c3504bb3.png?v=1763070974"},{"product_id":"238761","title":"ZODIAC'S \"WIDE-TAIL\" EVOLUTION SOFTAIL STYLE FRAME","description":"\u003cp\u003eA custom built frame should not only look right but also handle well and must withstand the most severe stress, vibration and fatigue tests. It is also normal practice that the engine and transmission combination must fit in the frame without grinding, drilling or any other modification. You can be assured that this frame is the best and nothing but the best. For the Custom Builder that likes a Softail with \"Stretched Lowrider\" looks, this sleek design Softail frame has it all. The Wide-Tail frame uses thick wall tubing in some sections of the frame, which drastically improves the strength and roadholding without disturbing the lines. To give that sleek, stretched lowrider look, steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The rear section of the frame is widened to accept extra wide tires, including our new \"Big Foot\" Avon 200 tire, in combination with final chain drive. All mounts for side stand and forward controls are welded in place. Frames and swingarms are fully Tig-Welded for superior strength. Frame kits come complete with frame, swingarm, stainless swingarm pivot bolt with chrome spacer and bearing kit, chrome rear wheel axle and Stainless Steel protection plates for swingarm and shocks. All parts are separately available. Fender struts must be ordered separately. \u003cstrong\u003e\u003cbr\u003e Note: \u003c\/strong\u003eZodiac Wide Tail frames are approved by the Dutch R.D.W. and the German approval as a replacement frame for Harley-Davidson motorcycles, engine capacity may not exceed 1740 cc, power may not exceed 110 Horsepower. They may be used in combination with our approved rear Swingarms and our approved Ceriani front forks.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177056579959,"sku":"238761","price":1531.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_2b04018c-8886-4dea-b98d-cb075480cfdd.png?v=1763070974"},{"product_id":"238760","title":"ZODIAC'S \"WIDE-TAIL\" EVOLUTION SOFTAIL STYLE FRAME","description":"\u003cp\u003eA custom built frame should not only look right but also handle well and must withstand the most severe stress, vibration and fatigue tests. It is also normal practice that the engine and transmission combination must fit in the frame without grinding, drilling or any other modification. You can be assured that this frame is the best and nothing but the best. For the Custom Builder that likes a Softail with \"Stretched Lowrider\" looks, this sleek design Softail frame has it all. The Wide-Tail frame uses thick wall tubing in some sections of the frame, which drastically improves the strength and roadholding without disturbing the lines. To give that sleek, stretched lowrider look, steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The rear section of the frame is widened to accept extra wide tires, including our new \"Big Foot\" Avon 200 tire, in combination with final chain drive. All mounts for side stand and forward controls are welded in place. Frames and swingarms are fully Tig-Welded for superior strength. Frame kits come complete with frame, swingarm, stainless swingarm pivot bolt with chrome spacer and bearing kit, chrome rear wheel axle and Stainless Steel protection plates for swingarm and shocks. All parts are separately available. Fender struts must be ordered separately. \u003cstrong\u003e\u003cbr\u003e Note: \u003c\/strong\u003eZodiac Wide Tail frames are approved by the Dutch R.D.W. and the German approval as a replacement frame for Harley-Davidson motorcycles, engine capacity may not exceed 1740 cc, power may not exceed 110 Horsepower. They may be used in combination with our approved rear Swingarms and our approved Ceriani front forks.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177056612727,"sku":"238760","price":2356.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_6064b9d2-e5e0-49f9-b209-b6d73c0792d6.png?v=1763070974"},{"product_id":"237652","title":"ZODIAC'S \"WIDE-TAIL\" EVOLUTION SOFTAIL STYLE FRAME","description":"\u003cp\u003eA custom built frame should not only look right but also handle well and must withstand the most severe stress, vibration and fatigue tests. It is also normal practice that the engine and transmission combination must fit in the frame without grinding, drilling or any other modification. You can be assured that this frame is the best and nothing but the best. For the Custom Builder that likes a Softail with \"Stretched Lowrider\" looks, this sleek design Softail frame has it all. The Wide-Tail frame uses thick wall tubing in some sections of the frame, which drastically improves the strength and roadholding without disturbing the lines. To give that sleek, stretched lowrider look, steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The rear section of the frame is widened to accept extra wide tires, including our new \"Big Foot\" Avon 200 tire, in combination with final chain drive. All mounts for side stand and forward controls are welded in place. Frames and swingarms are fully Tig-Welded for superior strength. Frame kits come complete with frame, swingarm, stainless swingarm pivot bolt with chrome spacer and bearing kit, chrome rear wheel axle and Stainless Steel protection plates for swingarm and shocks. All parts are separately available. Fender struts must be ordered separately. \u003cstrong\u003e\u003cbr\u003e Note: \u003c\/strong\u003eZodiac Wide Tail frames are approved by the Dutch R.D.W. and the German approval as a replacement frame for Harley-Davidson motorcycles, engine capacity may not exceed 1740 cc, power may not exceed 110 Horsepower. They may be used in combination with our approved rear Swingarms and our approved Ceriani front forks.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177057268087,"sku":"237652","price":47.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_653ead58-6acc-4a18-af08-50cabb9856f4.png?v=1763070982"},{"product_id":"238765","title":"ZODIAC'S \"WIDE-TAIL\" EVOLUTION SOFTAIL STYLE FRAME","description":"\u003cp\u003eA custom built frame should not only look right but also handle well and must withstand the most severe stress, vibration and fatigue tests. It is also normal practice that the engine and transmission combination must fit in the frame without grinding, drilling or any other modification. You can be assured that this frame is the best and nothing but the best. For the Custom Builder that likes a Softail with \"Stretched Lowrider\" looks, this sleek design Softail frame has it all. The Wide-Tail frame uses thick wall tubing in some sections of the frame, which drastically improves the strength and roadholding without disturbing the lines. To give that sleek, stretched lowrider look, steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The rear section of the frame is widened to accept extra wide tires, including our new \"Big Foot\" Avon 200 tire, in combination with final chain drive. All mounts for side stand and forward controls are welded in place. Frames and swingarms are fully Tig-Welded for superior strength. Frame kits come complete with frame, swingarm, stainless swingarm pivot bolt with chrome spacer and bearing kit, chrome rear wheel axle and Stainless Steel protection plates for swingarm and shocks. All parts are separately available. Fender struts must be ordered separately. \u003cstrong\u003e\u003cbr\u003e Note: \u003c\/strong\u003eZodiac Wide Tail frames are approved by the Dutch R.D.W. and the German approval as a replacement frame for Harley-Davidson motorcycles, engine capacity may not exceed 1740 cc, power may not exceed 110 Horsepower. They may be used in combination with our approved rear Swingarms and our approved Ceriani front forks.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177057431927,"sku":"238765","price":9.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_92725cfe-1078-48c6-939d-382d0e0c7104.png?v=1763070988"},{"product_id":"238767","title":"ZODIAC'S \"SUPER-ASS MK1\" EVOLUTION SOFTAIL STYLE FRAME KIT","description":"\u003cp\u003eIf you are talking about a custom built frame kit that can take a real \"Big-Bad-Fat-Tire\" you must be talking about our \"Super-Ass\" frame kits. The frames used in these kits are our approved Softail style frames with 1 1\/4\" tubing but supplied complete with a swingarm wide enough to accept a 250 series rear tire on a 8\" rim and still be able to use the stock final belt drive. When using the 2000 to present 1 1\/8\" wide final belt drive you can even mount a 260 tire on a 9\" wide rim. Use a 132 tooth belt on 32\/65 and 32\/66 pulley combinations or a 133 tooth belt on 32\/68 pulley combinations. These frame and Swingarm combinations are not only the best looking kits available, they also handle very well and withstand the most severe stress, vibration and fatigue tests. It is normal practice that the engine and transmission combination fits this frame without grinding, drilling or any other modification. The steering head is raked to 38 degrees, this requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. All mounts for side stand and forward controls are welded in place. Frames are fully Tig-Welded for superior strength. Due to the variety of custom made wheels, axle spacers are not included. Fender and fender struts, 25 mm extended sprocket shaft extension, and 25mm extended sprocket shaft nut must be ordered separately.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177057464695,"sku":"238767","price":2678.24,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_18379fcf-83f3-41a3-86b4-201b30620245.png?v=1763070988"},{"product_id":"236872","title":"ZODIAC'S \"SUPER-ASS MK1\" EVOLUTION SOFTAIL STYLE FRAME KIT","description":"\u003cp\u003eIf you are talking about a custom built frame kit that can take a real \"Big-Bad-Fat-Tire\" you must be talking about our \"Super-Ass\" frame kits. The frames used in these kits are our approved Softail style frames with 1 1\/4\" tubing but supplied complete with a swingarm wide enough to accept a 250 series rear tire on a 8\" rim and still be able to use the stock final belt drive. When using the 2000 to present 1 1\/8\" wide final belt drive you can even mount a 260 tire on a 9\" wide rim. Use a 132 tooth belt on 32\/65 and 32\/66 pulley combinations or a 133 tooth belt on 32\/68 pulley combinations. These frame and Swingarm combinations are not only the best looking kits available, they also handle very well and withstand the most severe stress, vibration and fatigue tests. It is normal practice that the engine and transmission combination fits this frame without grinding, drilling or any other modification. The steering head is raked to 38 degrees, this requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. All mounts for side stand and forward controls are welded in place. Frames are fully Tig-Welded for superior strength. Due to the variety of custom made wheels, axle spacers are not included. Fender and fender struts, 25 mm extended sprocket shaft extension, and 25mm extended sprocket shaft nut must be ordered separately.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177057497463,"sku":"236872","price":1575.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_28cd0f5c-560c-44ae-aa34-bc68b1edbce1.png?v=1763070989"},{"product_id":"781865","title":"ZODIAC'S \"SUPER-ASS MK1\" EVOLUTION SOFTAIL STYLE FRAME KIT","description":"\u003cp\u003eIf you are talking about a custom built frame kit that can take a real \"Big-Bad-Fat-Tire\" you must be talking about our \"Super-Ass\" frame kits. The frames used in these kits are our approved Softail style frames with 1 1\/4\" tubing but supplied complete with a swingarm wide enough to accept a 250 series rear tire on a 8\" rim and still be able to use the stock final belt drive. When using the 2000 to present 1 1\/8\" wide final belt drive you can even mount a 260 tire on a 9\" wide rim. Use a 132 tooth belt on 32\/65 and 32\/66 pulley combinations or a 133 tooth belt on 32\/68 pulley combinations. These frame and Swingarm combinations are not only the best looking kits available, they also handle very well and withstand the most severe stress, vibration and fatigue tests. It is normal practice that the engine and transmission combination fits this frame without grinding, drilling or any other modification. The steering head is raked to 38 degrees, this requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. All mounts for side stand and forward controls are welded in place. Frames are fully Tig-Welded for superior strength. Due to the variety of custom made wheels, axle spacers are not included. Fender and fender struts, 25 mm extended sprocket shaft extension, and 25mm extended sprocket shaft nut must be ordered separately.\u003c\/p\u003e","brand":"Eastern MC Parts","offers":[{"title":"Default Title","offer_id":56177057661303,"sku":"781865","price":80.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_3ef2466b-2381-4fa6-89a7-1ade8517ebca.png?v=1763070996"},{"product_id":"701498","title":"ZODIAC'S \"SUPER-ASS MK1\" EVOLUTION SOFTAIL STYLE FRAME KIT","description":"\u003cp\u003eIf you are talking about a custom built frame kit that can take a real \"Big-Bad-Fat-Tire\" you must be talking about our \"Super-Ass\" frame kits. The frames used in these kits are our approved Softail style frames with 1 1\/4\" tubing but supplied complete with a swingarm wide enough to accept a 250 series rear tire on a 8\" rim and still be able to use the stock final belt drive. When using the 2000 to present 1 1\/8\" wide final belt drive you can even mount a 260 tire on a 9\" wide rim. Use a 132 tooth belt on 32\/65 and 32\/66 pulley combinations or a 133 tooth belt on 32\/68 pulley combinations. These frame and Swingarm combinations are not only the best looking kits available, they also handle very well and withstand the most severe stress, vibration and fatigue tests. It is normal practice that the engine and transmission combination fits this frame without grinding, drilling or any other modification. The steering head is raked to 38 degrees, this requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. All mounts for side stand and forward controls are welded in place. Frames are fully Tig-Welded for superior strength. Due to the variety of custom made wheels, axle spacers are not included. Fender and fender struts, 25 mm extended sprocket shaft extension, and 25mm extended sprocket shaft nut must be ordered separately.\u003c\/p\u003e","brand":"Franklin Motors","offers":[{"title":"Default Title","offer_id":56177057759607,"sku":"701498","price":0.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_45a1305a-40c0-469e-9a26-8a9ab3a4204b.png?v=1763071000"},{"product_id":"730525","title":"WHEEL AXLES","description":"\u003cp\u003eA wide variety in lengths for many stock and custom applications. Can be used as front or rear wheel axles. Axles in 3\/4\" (19.05mm) diameter can also be used as a swing arm pivot bolt in Swing arm frames.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177057792375,"sku":"730525","price":98.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_6ab5c352-6354-4e39-971b-56093e791604.png?v=1763071001"},{"product_id":"742876","title":"ZODIAC'S \"SUPER-ASS MK1\" EVOLUTION SOFTAIL STYLE FRAME KIT","description":"\u003cp\u003eIf you are talking about a custom built frame kit that can take a real \"Big-Bad-Fat-Tire\" you must be talking about our \"Super-Ass\" frame kits. The frames used in these kits are our approved Softail style frames with 1 1\/4\" tubing but supplied complete with a swingarm wide enough to accept a 250 series rear tire on a 8\" rim and still be able to use the stock final belt drive. When using the 2000 to present 1 1\/8\" wide final belt drive you can even mount a 260 tire on a 9\" wide rim. Use a 132 tooth belt on 32\/65 and 32\/66 pulley combinations or a 133 tooth belt on 32\/68 pulley combinations. These frame and Swingarm combinations are not only the best looking kits available, they also handle very well and withstand the most severe stress, vibration and fatigue tests. It is normal practice that the engine and transmission combination fits this frame without grinding, drilling or any other modification. The steering head is raked to 38 degrees, this requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. All mounts for side stand and forward controls are welded in place. Frames are fully Tig-Welded for superior strength. Due to the variety of custom made wheels, axle spacers are not included. Fender and fender struts, 25 mm extended sprocket shaft extension, and 25mm extended sprocket shaft nut must be ordered separately.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177057825143,"sku":"742876","price":33.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_a3c77d05-2351-43a2-9edd-be7576582815.png?v=1763071002"},{"product_id":"236491","title":"ZODIAC'S \"SUPER-ASS MK1\" EVOLUTION SOFTAIL STYLE FRAME KIT","description":"\u003cp\u003eIf you are talking about a custom built frame kit that can take a real \"Big-Bad-Fat-Tire\" you must be talking about our \"Super-Ass\" frame kits. The frames used in these kits are our approved Softail style frames with 1 1\/4\" tubing but supplied complete with a swingarm wide enough to accept a 250 series rear tire on a 8\" rim and still be able to use the stock final belt drive. When using the 2000 to present 1 1\/8\" wide final belt drive you can even mount a 260 tire on a 9\" wide rim. Use a 132 tooth belt on 32\/65 and 32\/66 pulley combinations or a 133 tooth belt on 32\/68 pulley combinations. These frame and Swingarm combinations are not only the best looking kits available, they also handle very well and withstand the most severe stress, vibration and fatigue tests. It is normal practice that the engine and transmission combination fits this frame without grinding, drilling or any other modification. The steering head is raked to 38 degrees, this requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. All mounts for side stand and forward controls are welded in place. Frames are fully Tig-Welded for superior strength. Due to the variety of custom made wheels, axle spacers are not included. Fender and fender struts, 25 mm extended sprocket shaft extension, and 25mm extended sprocket shaft nut must be ordered separately.\u003c\/p\u003e","brand":"Zodiac (Genuine Zodiac Products)","offers":[{"title":"Default Title","offer_id":56177057890679,"sku":"236491","price":99.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_5354d259-b64c-4d81-95c9-ec1b0ba2e7af.png?v=1763071004"},{"product_id":"722579","title":"FAT TUBE RIGHT SIDE DRIVE FRAME KIT FOR UP TO 330 REAR TIRES","description":"\u003cp\u003eThe Fat Tube RSD frame is designed to accommodate for the latest extreme wide rear tires, such as Avon's 300 and 330. Frame accepts stock and aftermarket Evolution style Big Twin engines, when used in conjunction with ZPN236889 motor mount adapter it will also accept a Twin CamA style engine. Must be used with Right Side Drive transmission. The Right Side Drive frame allows for central mounting of the 330 tire in the frame and keeping a perfect balance in the bike. The frame features massive 35mm down tubes and 28mm swing arm tube size. In addition we increased the frame side plate thickness from 12 into 15mm, providing Fat looks that are in balance with the wide rear tire. These side plates are stepped at the seat mounting area, allowing the use of an Evolution Softail style seat, such as our Le Pera Bare Bone seat. Frame takes up to 12 1\/2\" wide RSD rear fenders. The steering head is raked to 38 degrees, this requires a 4\" to 6\" overstock fork (depending on the front wheel and tire size used). Mounts for side stand and forward controls are welded in place. The frame also features a Twin Cam style oil drain system. Frame is fully TIG welded for superior strength and takes 1987 thru 1999 Softail style shock absorbers, Evolution Big Twin oil tank, Flat Side gas tank, Evolution Softail style forward controls, Big Twin style steering head bearing cups, and Custom rear brake calipers with Y-bracket.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177058972023,"sku":"722579","price":3258.93,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_f1a72530-c63e-4c07-a424-b3fef7ad42b0.png?v=1763071012"},{"product_id":"722580","title":"FAT TUBE RIGHT SIDE DRIVE FRAME KIT FOR UP TO 330 REAR TIRES","description":"\u003cp\u003eThe Fat Tube RSD frame is designed to accommodate for the latest extreme wide rear tires, such as Avon's 300 and 330. Frame accepts stock and aftermarket Evolution style Big Twin engines, when used in conjunction with ZPN236889 motor mount adapter it will also accept a Twin CamA style engine. Must be used with Right Side Drive transmission. The Right Side Drive frame allows for central mounting of the 330 tire in the frame and keeping a perfect balance in the bike. The frame features massive 35mm down tubes and 28mm swing arm tube size. In addition we increased the frame side plate thickness from 12 into 15mm, providing Fat looks that are in balance with the wide rear tire. These side plates are stepped at the seat mounting area, allowing the use of an Evolution Softail style seat, such as our Le Pera Bare Bone seat. Frame takes up to 12 1\/2\" wide RSD rear fenders. The steering head is raked to 38 degrees, this requires a 4\" to 6\" overstock fork (depending on the front wheel and tire size used). Mounts for side stand and forward controls are welded in place. The frame also features a Twin Cam style oil drain system. Frame is fully TIG welded for superior strength and takes 1987 thru 1999 Softail style shock absorbers, Evolution Big Twin oil tank, Flat Side gas tank, Evolution Softail style forward controls, Big Twin style steering head bearing cups, and Custom rear brake calipers with Y-bracket.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177059004791,"sku":"722580","price":2033.58,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_98956f15-16e8-476d-a696-0d9c51a09576.png?v=1763071012"},{"product_id":"722581","title":"FAT TUBE RIGHT SIDE DRIVE FRAME KIT FOR UP TO 330 REAR TIRES","description":"\u003cp\u003eThe Fat Tube RSD frame is designed to accommodate for the latest extreme wide rear tires, such as Avon's 300 and 330. Frame accepts stock and aftermarket Evolution style Big Twin engines, when used in conjunction with ZPN236889 motor mount adapter it will also accept a Twin CamA style engine. Must be used with Right Side Drive transmission. The Right Side Drive frame allows for central mounting of the 330 tire in the frame and keeping a perfect balance in the bike. The frame features massive 35mm down tubes and 28mm swing arm tube size. In addition we increased the frame side plate thickness from 12 into 15mm, providing Fat looks that are in balance with the wide rear tire. These side plates are stepped at the seat mounting area, allowing the use of an Evolution Softail style seat, such as our Le Pera Bare Bone seat. Frame takes up to 12 1\/2\" wide RSD rear fenders. The steering head is raked to 38 degrees, this requires a 4\" to 6\" overstock fork (depending on the front wheel and tire size used). Mounts for side stand and forward controls are welded in place. The frame also features a Twin Cam style oil drain system. Frame is fully TIG welded for superior strength and takes 1987 thru 1999 Softail style shock absorbers, Evolution Big Twin oil tank, Flat Side gas tank, Evolution Softail style forward controls, Big Twin style steering head bearing cups, and Custom rear brake calipers with Y-bracket.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177059332471,"sku":"722581","price":969.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_55fc9d34-7305-426c-ae24-603771d7a066.png?v=1763071014"},{"product_id":"722585","title":"WHEEL AXLES","description":"\u003cp\u003eA wide variety in lengths for many stock and custom applications. Can be used as front or rear wheel axles. Axles in 3\/4\" (19.05mm) diameter can also be used as a swing arm pivot bolt in Swing arm frames.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177059398007,"sku":"722585","price":75.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_3d5ef505-307c-40cf-b2b8-489240fa7047.png?v=1763071016"},{"product_id":"236175","title":"FAT TUBE RIGHT SIDE DRIVE FRAME KIT FOR UP TO 330 REAR TIRES","description":"\u003cp\u003eThe Fat Tube RSD frame is designed to accommodate for the latest extreme wide rear tires, such as Avon's 300 and 330. Frame accepts stock and aftermarket Evolution style Big Twin engines, when used in conjunction with ZPN236889 motor mount adapter it will also accept a Twin CamA style engine. Must be used with Right Side Drive transmission. The Right Side Drive frame allows for central mounting of the 330 tire in the frame and keeping a perfect balance in the bike. The frame features massive 35mm down tubes and 28mm swing arm tube size. In addition we increased the frame side plate thickness from 12 into 15mm, providing Fat looks that are in balance with the wide rear tire. These side plates are stepped at the seat mounting area, allowing the use of an Evolution Softail style seat, such as our Le Pera Bare Bone seat. Frame takes up to 12 1\/2\" wide RSD rear fenders. The steering head is raked to 38 degrees, this requires a 4\" to 6\" overstock fork (depending on the front wheel and tire size used). Mounts for side stand and forward controls are welded in place. The frame also features a Twin Cam style oil drain system. Frame is fully TIG welded for superior strength and takes 1987 thru 1999 Softail style shock absorbers, Evolution Big Twin oil tank, Flat Side gas tank, Evolution Softail style forward controls, Big Twin style steering head bearing cups, and Custom rear brake calipers with Y-bracket.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177060446583,"sku":"236175","price":84.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_f683fc52-e5ab-406e-ab70-c57459173122.png?v=1763071027"},{"product_id":"32418","title":"TRANSMISSION MOUNTING PLATES FOR SOFTAIL","description":"\u003cp\u003eAn exact reproduction of the 5 Speed transmission mounting plate as used on all 5 Speed Softail 1987-1999 (OEM 47698-86B). Will also fit our Wide-Tail Softail frame.\u003c\/p\u003e","brand":"Zodiac (Genuine Zodiac Products)","offers":[{"title":"Default Title","offer_id":56177060479351,"sku":"32418","price":57.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_080d51ac-e571-4873-b784-ca1a0f12b090.png?v=1763071025"},{"product_id":"734059","title":"TRANSMISSION MOUNTING PLATES FOR SOFTAIL","description":"\u003cp\u003eAn exact reproduction of the 5 Speed transmission mounting plate as used on all 5 Speed Softail 1987-1999 (OEM 47698-86B). Will also fit our Wide-Tail Softail frame.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177060577655,"sku":"734059","price":17.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_5b82c9ef-eb31-48f3-bac7-14536f8766f1.png?v=1763071028"},{"product_id":"700951","title":"FAT TUBE RIGHT SIDE DRIVE FRAME KIT FOR UP TO 330 REAR TIRES","description":"\u003cp\u003eThe Fat Tube RSD frame is designed to accommodate for the latest extreme wide rear tires, such as Avon's 300 and 330. Frame accepts stock and aftermarket Evolution style Big Twin engines, when used in conjunction with ZPN236889 motor mount adapter it will also accept a Twin CamA style engine. Must be used with Right Side Drive transmission. The Right Side Drive frame allows for central mounting of the 330 tire in the frame and keeping a perfect balance in the bike. The frame features massive 35mm down tubes and 28mm swing arm tube size. In addition we increased the frame side plate thickness from 12 into 15mm, providing Fat looks that are in balance with the wide rear tire. These side plates are stepped at the seat mounting area, allowing the use of an Evolution Softail style seat, such as our Le Pera Bare Bone seat. Frame takes up to 12 1\/2\" wide RSD rear fenders. The steering head is raked to 38 degrees, this requires a 4\" to 6\" overstock fork (depending on the front wheel and tire size used). Mounts for side stand and forward controls are welded in place. The frame also features a Twin Cam style oil drain system. Frame is fully TIG welded for superior strength and takes 1987 thru 1999 Softail style shock absorbers, Evolution Big Twin oil tank, Flat Side gas tank, Evolution Softail style forward controls, Big Twin style steering head bearing cups, and Custom rear brake calipers with Y-bracket.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177061855607,"sku":"700951","price":147.02,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_a28146cb-6a72-4425-88ba-2ca10540d4a8.png?v=1763071030"},{"product_id":"236207","title":"ZODIAC'S SPORTAIL SPORTSTER FRAME FOR UP TO 250 TIRES","description":"\u003cp\u003eWe have created a Sportster frame with the same sleek design as our Wide Tail Softail frame. The Sportail frame features a \"Stretched Low-Rider\" look, is made from thick wall quality tubing and TIG-welded for improved strength and road holding without disturbing the lines. To obtain the sleek stretched Low-Rider look the steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The engine is located with no offset in the frame and a rear frame section wide enough to accept extra wide tires. The Sportail SuperAss, is wide enough to take up to 250 wide rear tires. In combination with final belt drive. The SuperAss requires an off-set front pulley or a spacer behind the front pulley. Pulley cover requires spacing. The length of the frame requires the use of a drive belt with approx. 135 teeth. Mounts for a Big Twin side stand and Big Twin forward controls as well as 1974 to present Sportster forward controls are welded in place. Stock style Narrow or Wide Glide forks as well as our state-of-the-art Ceriani forks can be used with the frame, it will also accept many other Custom front forks. The frame will take any 1974-1985 Ironhead Sportster engines as well as 4 Speed and 1986-2003 style 5 Speed Evolution Sportster engines. Because of the right hand final drive the stock style Softail oil tank does not fit, therefore our special Sportail style oil tank or a custom made oil tank such as our Custom Round oil tank must be used. The frame is designed to take Softail type parts and accessories such as Flat Side tanks, forward controls, seats and 1989-1999 Softail shock absorbers. Due to the completely different shape of the swingarm a Rigid Frame type rear caliper kit must be used. \u003cstrong\u003e1989-1999 Softail shock absorbers can be found elsewhere in this section. \u003cbr\u003e Note: \u003c\/strong\u003eZodiac Sportail frames are approved as a replacement frame for Harley-Davidson Sportster motorcycles. They may be used in combination with our approved GCB front forks and\/or any other approved components.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177061888375,"sku":"236207","price":2657.29,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_9711aa1f-8a78-4712-aa10-01637403df26.png?v=1763071034"},{"product_id":"236171","title":"ZODIAC'S SPORTAIL SPORTSTER FRAME FOR UP TO 250 TIRES","description":"\u003cp\u003eWe have created a Sportster frame with the same sleek design as our Wide Tail Softail frame. The Sportail frame features a \"Stretched Low-Rider\" look, is made from thick wall quality tubing and TIG-welded for improved strength and road holding without disturbing the lines. To obtain the sleek stretched Low-Rider look the steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The engine is located with no offset in the frame and a rear frame section wide enough to accept extra wide tires. The Sportail SuperAss, is wide enough to take up to 250 wide rear tires. In combination with final belt drive. The SuperAss requires an off-set front pulley or a spacer behind the front pulley. Pulley cover requires spacing. The length of the frame requires the use of a drive belt with approx. 135 teeth. Mounts for a Big Twin side stand and Big Twin forward controls as well as 1974 to present Sportster forward controls are welded in place. Stock style Narrow or Wide Glide forks as well as our state-of-the-art Ceriani forks can be used with the frame, it will also accept many other Custom front forks. The frame will take any 1974-1985 Ironhead Sportster engines as well as 4 Speed and 1986-2003 style 5 Speed Evolution Sportster engines. Because of the right hand final drive the stock style Softail oil tank does not fit, therefore our special Sportail style oil tank or a custom made oil tank such as our Custom Round oil tank must be used. The frame is designed to take Softail type parts and accessories such as Flat Side tanks, forward controls, seats and 1989-1999 Softail shock absorbers. Due to the completely different shape of the swingarm a Rigid Frame type rear caliper kit must be used. \u003cstrong\u003e1989-1999 Softail shock absorbers can be found elsewhere in this section. \u003cbr\u003e Note: \u003c\/strong\u003eZodiac Sportail frames are approved as a replacement frame for Harley-Davidson Sportster motorcycles. They may be used in combination with our approved GCB front forks and\/or any other approved components.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177062084983,"sku":"236171","price":1657.97,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_303dc761-2eaf-4bee-9caf-ff16c02c0f7a.png?v=1763071040"},{"product_id":"236200","title":"ZODIAC'S SPORTAIL SPORTSTER FRAME FOR UP TO 250 TIRES","description":"\u003cp\u003eWe have created a Sportster frame with the same sleek design as our Wide Tail Softail frame. The Sportail frame features a \"Stretched Low-Rider\" look, is made from thick wall quality tubing and TIG-welded for improved strength and road holding without disturbing the lines. To obtain the sleek stretched Low-Rider look the steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The engine is located with no offset in the frame and a rear frame section wide enough to accept extra wide tires. The Sportail SuperAss, is wide enough to take up to 250 wide rear tires. In combination with final belt drive. The SuperAss requires an off-set front pulley or a spacer behind the front pulley. Pulley cover requires spacing. The length of the frame requires the use of a drive belt with approx. 135 teeth. Mounts for a Big Twin side stand and Big Twin forward controls as well as 1974 to present Sportster forward controls are welded in place. Stock style Narrow or Wide Glide forks as well as our state-of-the-art Ceriani forks can be used with the frame, it will also accept many other Custom front forks. The frame will take any 1974-1985 Ironhead Sportster engines as well as 4 Speed and 1986-2003 style 5 Speed Evolution Sportster engines. Because of the right hand final drive the stock style Softail oil tank does not fit, therefore our special Sportail style oil tank or a custom made oil tank such as our Custom Round oil tank must be used. The frame is designed to take Softail type parts and accessories such as Flat Side tanks, forward controls, seats and 1989-1999 Softail shock absorbers. Due to the completely different shape of the swingarm a Rigid Frame type rear caliper kit must be used. \u003cstrong\u003e1989-1999 Softail shock absorbers can be found elsewhere in this section. \u003cbr\u003e Note: \u003c\/strong\u003eZodiac Sportail frames are approved as a replacement frame for Harley-Davidson Sportster motorcycles. They may be used in combination with our approved GCB front forks and\/or any other approved components.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177062117751,"sku":"236200","price":682.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_88bb189c-6b0c-49a8-80e6-352f6c0a7ef3.png?v=1763071043"},{"product_id":"236432","title":"WHEEL AXLES","description":"\u003cp\u003eA wide variety in lengths for many stock and custom applications. Can be used as front or rear wheel axles. Axles in 3\/4\" (19.05mm) diameter can also be used as a swing arm pivot bolt in Swing arm frames.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177062216055,"sku":"236432","price":82.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/3ed659b2fa0b.png?v=1763071044"},{"product_id":"236172","title":"ZODIAC'S SPORTAIL SPORTSTER FRAME FOR UP TO 250 TIRES","description":"\u003cp\u003eWe have created a Sportster frame with the same sleek design as our Wide Tail Softail frame. The Sportail frame features a \"Stretched Low-Rider\" look, is made from thick wall quality tubing and TIG-welded for improved strength and road holding without disturbing the lines. To obtain the sleek stretched Low-Rider look the steering head is raked to 38 degrees. This requires a 4\" to 8\" overstock fork depending on the wheel and tire size used. The engine is located with no offset in the frame and a rear frame section wide enough to accept extra wide tires. The Sportail SuperAss, is wide enough to take up to 250 wide rear tires. In combination with final belt drive. The SuperAss requires an off-set front pulley or a spacer behind the front pulley. Pulley cover requires spacing. The length of the frame requires the use of a drive belt with approx. 135 teeth. Mounts for a Big Twin side stand and Big Twin forward controls as well as 1974 to present Sportster forward controls are welded in place. Stock style Narrow or Wide Glide forks as well as our state-of-the-art Ceriani forks can be used with the frame, it will also accept many other Custom front forks. The frame will take any 1974-1985 Ironhead Sportster engines as well as 4 Speed and 1986-2003 style 5 Speed Evolution Sportster engines. Because of the right hand final drive the stock style Softail oil tank does not fit, therefore our special Sportail style oil tank or a custom made oil tank such as our Custom Round oil tank must be used. The frame is designed to take Softail type parts and accessories such as Flat Side tanks, forward controls, seats and 1989-1999 Softail shock absorbers. Due to the completely different shape of the swingarm a Rigid Frame type rear caliper kit must be used. \u003cstrong\u003e1989-1999 Softail shock absorbers can be found elsewhere in this section. \u003cbr\u003e Note: \u003c\/strong\u003eZodiac Sportail frames are approved as a replacement frame for Harley-Davidson Sportster motorcycles. They may be used in combination with our approved GCB front forks and\/or any other approved components.\u003c\/p\u003e","brand":"Zodiac (Made in Europe)","offers":[{"title":"Default Title","offer_id":56177063231863,"sku":"236172","price":29.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0958\/3244\/1207\/files\/standard-rgba_e51e45c0-8ca8-4db5-a3a1-2eaab8991ded.png?v=1763071045"}],"url":"https:\/\/shop.franklinmotors.ie\/collections\/rear-suspension.oembed?page=2","provider":"Franklin Motors","version":"1.0","type":"link"}